VENT TENT

FEATURES:

U-TECK has developed the Vent-Tent, a portable shelter with more safety features than any other
manufacturer currently has available in today’s market

The Vent-Tent is specially designed to safeguard the craft person from fatal carbon monoxide build-up.
The standard features that U-TECK installed allow air to be fully circulated by the following methods:
• Three of the sides have a lower-level vent, which allows for up to 18 inches of opening for air
circulation at ground level.
• Two of the sides have a window, which may also be opened for upper-level air circulation.
• The combination of open lower-level vents and open windows allows for cross-ventilation, which
eliminates the possibility of fatal carbon monoxide build-up.

U-TECK has also installed a “sock” in the back of the Vent-Tent to allow for a ventilator hose, blower, or
heater-blower combination to be hooked up.

In addition to carbon monoxide protection, the VentTent, with its roll-up bottom and side windows, is excellent on a hot, rainy day!

Call for a quote today! (800) 542-7011

MASTER 8″ Confined Space Ventilator

MASTER 8″ Confined Space Ventilator with Attached Ducting/Canister all-in-one unit
The MASTER 8″ M08-25 ventilator is lightweight and has a small diameter, making it ideal for use where space is at a premium. It comes complete with 25′ of ducting in an integrated duct carrier for greater convenience. The ventilator delivers high airflow for safety and is constructed with a dual walled polyethylene housing for exceptional durability and long life. The canister is ergonomically designed to keep the ducting clean, dry and contained for ease of transport and easily attaches to the canister with rubber draw latches. The Ventilator and ducting/canister all-in-one unit can be purchased as a complete unit or as separate pieces. Increase productivity and safety with MASTER’S M08-25 confined space ventilator. MASTER – The professional’s choice since 1953. Call for a quote today! (800) 542-7011
		FEATURES Best in class airflow of 930 CFM for personal safety Dual walled polyethylene housing design, delivers exceptional durability and long life 8 motor mount vanes in separate poly sleeve to absorb external forces without disturbing the internal mechanisms or airflow Rubber draw latch for easy tool-free attachment to canister 25′ single ply PVC vinyl coated polyester ducting with a standard fastening cuff at the end MASTER yellow for high visability & increased safety Stackable for efficient storage and work space Lightweight (15lb/6.8kg) and easily portable ETL listed for compliance with North American safety standards
		MOTOR SPECIFICATIONS:	A-M08-25 8″
		Voltage	115V AC
		Frequency	60 Hz
		Phase	One
		Electric Motor	1/3
		Speeds	1
		R.P.M	3000-3600
		Max. Fan Diameter	8″
		DIMENSIONS:
		Fan Type	Axial Blower/Extractor
		Size	8″ diameter
		Weight	35/30 lbs.
		Height	14.5″
		Length	36.25″
		Width	12.5″

LIGHT INDUSTRIAL AND UTILITY VENTILATORS

Working in confined spaces can be tricky, and without the right equipment, dangerous. No matter what environment you have to deal with, a plentiful supply of fresh, circulating air or removal of harmful air is critical.To work comfortably and safely it is your job to take the proper safety precautions and choose the right equipment. Put simply, you have to insure the ventilator you choose will be durable, dependable and perform under the toughest conditions.For a versatile portable ventilator with just the right amount of power, the UT-VAF-1500 (blower/extractor) or UT-VAF-1500B (blower only) is ideally suited for light industrial or utility applications. A perfect workhorse for small confined spaces, such as manholes and sewers, these compact blowers deliver maximum airflow for a safe, comfortable and controlled work environment. Your construction, utility or telephone crews can depend on the UT-VAF-1500/1500B to deliver a continuous flow of fresh air to the UT-VAF-1500 to blow and extract toxic or noxious gases. Call for a quote today! (800) 542-7011
		FEATURES CFM rating of 877 (UT-VAF-1500) and 749 (UT-VAF-1500B) Lightweight, only 18 pounds (8.2 Kg) Stackable to save storage or work space area Available in bright yellow for high visibility Capability to connect up to 50 feet (15.24 m) of straight duct Ideal for manhole applications This model is available with an American 3-prong plug or with the European Shuko plug.
		MODEL	UT-VAF-1500	UT-VAF-1500B	A B
		Voltage	115V AC~	230V AC~	115V AC~
		Frequency	60 Hz	50 Hz	60 Hx
		Phase	Single	Single	Single
American 3-prong plug (pictured on the left) European Shuko plug (pictured on the right)		Electric Motor	1/4 Hp	1/4 Hp	1/4 Hp
		Current (amps)	2.5	1.3	2.5
		R.P.M.	3000	2260	3000
		Max. S.P.	1.5″	1.5″	1.5″

Industrial High Capacity Ventilator

Working in confined spaces can be tricky, and without the right equipment, dangerous. No matter what environment you have to deal with, a plentiful supply of fresh, circulating air or removal of harmful air is critical.To work comfortably and safely it is your job to take the proper safety precautions and choose the right equipment. Put simply, you have to insure the ventilator you choose will be durable, dependable and perform under the toughest conditions.For confined spaces that require a power house air ventilator, the UT-VAF-3000 can handle your most demanding industrial needs.With a forceful 1 H.P. motor, the UT-VAF-3000 can deliver both positive and negative airflow at an incredible maximum capacity of 2,091 CFM in the most difficult work environments. No matter what your industry or application-construction, demolition, utility, paper mill, shipyard, power station, tank purging, or manufacturing-the UT-VAF-3000 is designed to take on the toughest of jobs. Call for a quote today! (800) 542-7011
		FEATURES CFM rating of 2796 (59.2 m3) Weighs on 32.5 pounds (14.74kg) Stackable to save storage or work area space Powerful I Hp electric motor (.75 kW) capability Ideal for confined spaces that require greater airflow This model is available with an American 3-prong plug or with the European Shuko plug.
		MOTOR SPECIFICATIONS:
		UT-VAF-3000	A	B
		Voltage	115V AC~	230V AC~
		Frequency	60/50- Hz	50 Hz
American 3-prong plug     (pictured on the left)     European Shuko plug     (pictured on the right)		Phase	Single	Single
		Electric Motor	1 Hp (.75 kW)	1 Hp (.75 kW)
		Current (amps)	8/5.7	4.2
		R.P.M	3300/2800	2850
		Max. S.P.	3″	2.5″
		AIR FLOW RATES
		UT-VAF-3000	A	B
			CFM    M3/Min.	CFM   M3/Min.
		Free Air	2796     79.2	2492      70.6
		15′ Straight	1938     54.9	1722       48.8
		25′ Straight	1829    51.8	1646      46.6
		40′ Straight	1764     50.0	1556      44.1
		50′ Straight	1567     44.4	1173       33.2
		75′ Straight	1254      35.5	1094      31.0
		25′ 1-90 Bend	1564     44.3	1344      38.1
		25′ 2-90 Bend	1377     39.0	1232     34.9
		DIMENSIONS
		Fan Type	Axial Blower/Extractor
		Size	12″ dia. (305 mm)
		Weight	32.5 lbs. (14.75 kg)
		Height	21″ (533 mm)
		Length	17″ (432 mm)
		Width	14″ (355 mm)

HIGH CAPACITY VENTILATOR

VPN: UT-VAF-8000
Working in confined spaces can be tricky, and without the right equipment, dangerous. No matter what environment you have to deal with, a plentiful supply of fresh, circulating air or removal of harmful air is critical.To work comfortably and safely it is your job to take the proper safety precautions and choose the right equipment. Put simply, you have to insure the ventilator you choose will be durable, dependable and perform under the toughest conditions.Designed for use in areas which require a greater exchange of air, VAF-8000 promises performance.Equipped with a powerful 5 HP motor, the VAF-8000 generates both positive and negative airflow at an outstanding maximum capacity of 9968 CFM. Hold on to your seat, this 20 inch unit out performs ventilators three to four times its size. If your in need of a ventilator for larger applications, turn to the one that provides extreme performance, turn to the VAF-8000. Call for a quote today! (800) 542-7011
		FEATURES CFM rating of 9968 (207.7 m3) Weighs on 119 pounds (53.97kg) Powerful 5 Hp electric motor Two built in handles Dual wall shell design Ideal for larger areas that require greater airflow This model is available with an American 3-prong plug or with the European Shuko plug.
		MOTOR SPECIFICATIONS:	A	B
		Voltage	230V AC	440V AC
		Frequency	60/50 Hz	60/50 Hz
		Phase	Three	Three
		Electric Motor	5 Hp	5 Hp
		Current (amps)	13	6.5
		R.P.M	3450	3450
		Max. S.P.	6.1″	6.1″
		AIR FLOW RATES	A
			CFM       M3/Min.
		Free Air	9968       282.3
		25′ Straight	9379       265.6
		25′ 1-90 bend	7193        203.7
		25′ 2-90 bends	6726       190.5
		50′ Straight	8664       245.3
		75′ Straight	8313        235.4
		DIMENSIONS
		Fan Type	Axial Blower/Extractor
		Size	20.5 ” dia. (520 mm)
		Weight	119 lbs. (53.97 Kg)
		Height	27.5″ (698 mm)
		Length	27.5 ” (698 mm)
		Width	25.5 ” (647 mm)

PNEUMATIC VENTILATOR

VPN: UT-VAF-3000P
Working in confined spaces can be tricky, and without the right equipment, dangerous. No matter what environment you have to deal with, a plentiful supply of fresh, circulating air or removal of harmful air is critical. To work comfortably and safely it is your job to take the proper safety precautions and choose the right equipment. Put simply, you have to insure the ventilator you choose will be durable, dependable and perform under the toughest conditions. For confined spaces that require a powerful ventilator that meets strict hazardous space standards, the UT-VAF-3000P delivers high-performance with uncompromising safety. The intrinsically safe design of the UT-VAF-3000P ensures against dangerous sparking. The energy-efficient, high-performance motor is totally enclosed, giving you the assurance to work safely. Yet, with a CFM rating of 2,063, the UT-VAF-3000P can provide all the continuous circulating airflow you need to get the job done. Call for a quote today! (800) 542-7011
		FEATURES CFM rating of 2,063 (58.4 m3) Weights only 28 pounds (12.7 Kg) Stackable to save storage or work space area Powerful 1.5 Hp pneumatic motor Capability to connect up to 125 feet (38 m) of straight duct Redirect stale compressed air away from the main air stream UL and C-UL listed for use in Class I, Groups A, B, C and D; Class II, Groups E, F and G; and Class III Hazardous locations
		MOTOR SPECIFICATIONS:
		Air Consumption	38 cfm
		Inlet Pressure (max)	100 psi
		Noise Level	86 dBa
		Motor	1.5 Hp
		Bearings	Permanently lubricated
		R.P.M.	3000
		AIR FLOW RATES
			CFM	M3/Min.
		Free Air	2063	58.4
		15′ Straight	1753	49.6
		15′ 1-90 bend	1616	45.7
		15′ 2-90 bends	1450	41.0
		25′ Straight	1619	45.8
		25′ 1-90 bend	1497	42.4
		25′ 2-90 bends	1433	40.6
		50′ Straight	1531	43.3
		100′ Straight	1243	35.2
		DIMENSIONS
		Fan Type	Axial Blower/Extractor
		Size	12″ dia. (305 mm)
		Weight	28 lbs. (14.75 kg)
		Height	21″ (533 mm)
		Length	17″ (432 mm)
		Width	14″ (355 mm)

 Pneumatic Ventilator Data Sheet

VENTILATOR ACCESSORIES

		DUCT WITH QUICK CONNECT 8″ diameter by 15′ length – VPN: U-0815 8″ diameter by 25′ length – VPN: U-0825 12″ diameter by 15′ length – VPN: U-1215 12″ diameter by 25′ length – VPN: U-1225 Available in 25 or 15 foot sizes for any model. Our duct hoses are made of flexible, light duty, vinyl, woven polyester. Ducts are easily retractable and designed to handle large volumes of air at relatively low pressure. The ducts are flame retardant and easily connect to fan lips for positive and/or negative airflow. Model 1225-SC duct is dipped in static conductive material for safe use in hazardous environments.
		8-INCH DUCT COUPLER VPN: A-8000 This circular metal ring will allow you to connect multiple sections of duct.
		DUCT STORAGE RACK VPN: UTDSR-25-08 VPN: UTDSR-25-12 Our durable metal rack is perfect for safe duct storage. It can store up to two 15′ duct lengths or one 25′ duct. This rack is available for 8″ or 12″ wide ducts.
		DUCT CARRIER 8 inch  VPN: UTDSR-25-08P        12 inch   VPN: UTDSR-25-12P These lightweight polyethylene duct carriers hold up to 25 ft. each of 8-inch or 12-inch flexible ducting.

7 Winter Weather Worker Safety Tips

Keep an Eye on the Weather

Nothing ruins productivity like having a jobsite full of workers who can’t work because a blizzard came through and you were caught unaware. Be prepared by keeping an eye on the forecast and knowing when winter weather is going to strike.

The best method is to check the national weather forecast every morning and several times as the day progresses. The National Oceanic and Atmospheric Administration (NOAA) is a great source to get timely weather reports on unpredictable changes in weather conditions.

This will ensure workers are given enough time and adequate warning to secure work areas, vacate the worksite, and drive home in relatively safe road conditions.

Check jobsites

The jobsite site – including any scaffolding and ladders, should be checked before work begins. This will ensure that there are no snowdrifts, ice, fallen trees, or other objects and debris scattered which can delay work or inadvertently create hazards for workers.

Be sure to stress the importance of fall precaution and protection to workers when icy conditions exist.

Spread salt or sand melt over any icy areas to help with traction for workers and vehicles. If an area can’t be cleared, be sure to mark that area and advise workers to use caution, especially when carrying materials and tools!

Remove any icicles that may have formed to prevent falling object hazards.

Provide a Warm Area for Breaks

Workers expend more energy when working in cold weather to keep their bodies warm. Make sure you have a heated area – like a tent, trailer or indoor area for workers to warm up from the cold – Our Vent Tents and Heaters make an excellent solution to this problem!

Encourage workers to take frequent breaks to warm up, drink something warm and change out of wet clothing!

Keep an eye on your workers for signs of fatigue, frostbite or hypothermia.

Wear Proper PPE

When winter weather conditions are present, be sure workers are wearing necessary personal protective equipment (PPE).

In addition to the normal required PPE, the following items should be considered when working in the cold on a job site:

Using liners in hard hats will help keep workers warm and prevent heat from escaping.

When selecting hand wear, Gloves and mittens should be selected to provide enough dexterity to work with tools and materials. Remind workers to always keep their gloves on, especially when climbing ladders, scaffolding, or getting onto trucks or other equipment. Frostbite can occur immediately if workers touch extremely cold metal with bare hands.

Encourage workers to wear waterproof boots, and to bring EXTRA socks to protect against the cold (and wet!).

Goggles, safety glasses, and facemasks can be treated with anti-fog spray to prevent their vision from being obstructed.

Our full line of PPE can help keep your workers warm and safe this winter!

Wear Layers!

Workers should wear warm clothing to protect against the cold and maintain proper levels of body heat. Wearing appropriate outer clothing to ensure their clothes do not get wet from the snow, would shield workers from being exposed to frostbite, cold stress, and hypothermia.

Keeping warm is one of the most important things when working in cold weather. The key is finding a balance of wearing enough layers to stay warm while still being able to maintain a good range of mobility to perform your work.

Layer clothing with some moisture-wicking thermals on your inner layer and have a waterproof outer layer to prevent moisture from soaking into your clothing. If clothing gets wet, it’s important to change into dry clothes to avoid losing body heat.

Limit the amount of skin exposed to cold temperatures with careful attention to the extremities by wearing knit hats and earmuffs for the head, wool socks for the feet, balaclavas for the face, and gloves and mittens for the hands.

In its Cold Stress Safety and Health Guide, OSHA offers the following guidance:

Dressing properly is extremely important to preventing cold stress. The type of fabric worn also makes a difference. Cotton loses its insulation value when it becomes wet. Wool, silk and most synthetics, on the other hand, retain their insulation even when wet. The following are recommendations for working in cold environments:

• Wear at least three layers of loose-fitting clothing. Layering provides better insulation. Do not wear tight-fitting clothing. (An inner layer of wool, silk or synthetic to keep moisture away from the body; a middle layer of wool or synthetic to provide insulation even when wet; an outer wind and rain protection layer that allows some ventilation to prevent overheating.)
• Wear a hat or hood to help keep your whole body warmer. Hats reduce the amount of body heat that escapes from your head.
• Use a knit mask to cover the face and mouth (if needed).
• Protect hands with insulated gloves (water resistant if necessary).
• Wear insulated and waterproof boots (or other footwear).

Put Emergency Kits in Work Vehicles 

Make sure each of your company’s work trucks / vehicles are equipped with winter weather emergency kits. Your kits should include an ice scraper, shovel, blankets or space blankets, water, emergency flares, matches non-perishable snacks, tow straps, and a backup battery for your cell phone. It’s also a good idea to have some sand, cat litter, or salt to help with traction in case you get stuck. Encourage your workers to create emergency kits for their personal vehicles.

Employers should also have in place emergency and first aid kits at strategic locations on the worksite so that in case of accidents workers can easily use them to help their co-workers until emergency services arrive to provide professional medical treatment as required.

Here is a basic kit, courtesy of the VA Dept of Emergency Management

Be cautious when driving in snow and ice. Give yourself plenty of time to get to your destination and leave plenty of space between yourself and other vehicles to avoid accidents.

Emergency kits should also contain flashlights as power outages are possible in severe winter weather.

Educate your Crew

Educate workers on the signs of frostbite and hypothermia. Even when employers do everything they can to protect workers, issues can still arise. Supervisors and workers need to know the symptoms of hypothermia and frostbite so that if anyone shows these signs, they can receive immediate medical attention. When workers know what to look for, it’s more likely they will seek medical treatment sooner.

Big Buddy Heater

FEATURES:

This patented radiant 4,000-18,000 BTU Liquid Propane heater is the perfect solution for heating up to 450 sq. ft. An integrated fan increases the heating capacity of this unit, blending radiant and convection style heat to give you the best of both worlds.

Two internal swivel regulators give you the ability to adapt usage from disposable cylinders to a remote gas supply with the purchase of a single hose and filter. (see below) To light the unit, simply push and rotate the knob. The built in Piezo sparking mechanism will take care of the rest. With the Oxygen Depletion Sensor (ODS) and accidental tip-over safety shut-off, you can be sure that you will enjoy years of comfortable outdoor safe heat.

weedender pedestal 2016

We have all been there, trying to find a telecom pedestal among a jungle of weeds and spending too much time and money keeping these pedestals clear of invasive weed growth. The old solutions of routinely trimming and spraying herbicides can be problems in themselves. U-TECK has perfected an innovative alternative for vegetation growth around pedestals with our WeedEnder Ped-Mat. This product has been used by the telecom industry, with excellent results, for 15 years.

Used at telecommunications pedestals, and cross-connect cabinets, the WeedEnder Ped-Mat’s dense fibers are made with 100% recycled plastic drink bottles. These fibers deprive weeds of sunlight while allowing water and nutrients to easily pass through to maintain the root system around the mat. This minimizes erosion while controlling vegetation growth around the pedestal without herbicides or labor intensive mowing and trimming.

Not to be confused with landscape fabrics, the ¼ inch matting is rugged and strong, held in place with a specially designed 316 stainless steel staking system created especially for use with WeedEnder Vegetation Control Products. This material is so durable trucks can be driven over it without any damage. But as tough as it is, WeedEnder offers unusual versatility by allowing it to be rolled up in the event of line repairs or additions then rolled back into position without any decrease in performance.