
GASTRAC 2.5% METHANE CYLINDER
VPN: JNCYLC2.5
MID: 11002171
Replacement 2.5% methane gas cylinder for the Quick Check Kit.
|

GASTRAC QUICK CHECK KIT
VPN: JNCQC1
MID: 11002168
Quick Check Kit should be used to check the NGX-6 each time you enter a manhole, according to practice.
|

GASTRAC 30″ PROBE
VPN: JNPROBE-NGX3
MID: 11001948
Non-conductive 30″ probe used with the GasTrac NGX-6 for testing manhole ducts and corners. Should also be used according to company practices to test through manhole cover puller access holes prior to removing cover.
|

GASTRAC SENSOR
VPN: JNNGX6HX6/SENSOR
MID: 001541622
Replacement Sensor for the Gas·Trac NGX-6. Field replaceable according to company practice.
|

QUICK CHECK KIT FOR RDA IIIA
VPN: JNCQC3
MID: 11001946
For use with the RDA III A. Includes cylinder of 0.5% methane gas, regulator and regulator hose. Carrying case not included.
|

RDA IIIA REDUCING FLOW VALVE
VPN: JNRFLOW
MID: 11056368
Regulator for the RDA IIIA. May also be used w/the GasTrac NGX-6.
|

RDA IIIA 30″ PROBE
VPN: JNPROBERDA
MID: 11022327
Non-conductive 30″ probe used with the RDA IIIA for testing manhole ducts and corners. Should also be used according to company practices to test through manhole cover puller access holes prior to removing cover.
|

RDA IIIA CARRYING CASE
VPN: CQCBAG
MID: 11002173
Durable carrying case for the Quick Check Kit equipment and the RDA IIIA Indicator.
|

RDA IIIA SENSOR
VPN: JNSENSOR RDA
MID: 11056369
Replacement sensor for the RDA IIIA Indicator. (Only qualified and authorized personnel should attempt sensor replacement.)
|

RDA IIIA 0.5% METHANE REPLACEMENT CYLINDER
VPN: JNCYL.5
MID: 11002170
Replacement 0.5% methane gas cylinder for the Quick Check kit.
|
TOTAL SUPPORT SERVICES
VPN: JNCERTIFY
MID: 11001945 or 700244834
A yearly inspection and certification program for your gas detectors. Verizon requests gas detectors be tested and certified accurate once a year.
U-Teck has the only authorized factory trained personnel to test and certify the Gas·Tracâ NGX-6 and RDA IIIA.
Contact U-Teck Customer Service to schedule certification at your location.
1-800-542-7011
|

VENT TENT
6′ X 6′ Pop-Up Tent
Vent Tents set up in seconds with no loose parts. The exclusive unified frames is made with cold rolled steel and fiberglass that is virtually unbreakable!
VPN: 39175
MID: 11351571
STORAGE BAG
Storage bag with full length zipper. 
VPN: 39177
MID: 11364055
REMOVABLE WALLS
VPN: 39176
MID: 11364056
|
WEED CONTROL
The Ped-Mat controls weeds around pedestals and RT sites, eliminating the need for herbicides or repeated visits with weed-eaters. Provides a safer work area from snakes, fire ants, poison ivy, redbugs, etc.
Description |
VPN |
MID |
Green-Round Pedestal |
74001-G |
00405531 |
Green Square/Rectangle Pedestal |
74002-G |
00405536 |
Green Square/Rectangle Pedestal |
74003-G |
87016871 |
Green Roll – 3′ x 25′ |
74203-G |
87016873 |
Green Roll – 6′ x 25′ |
74206-G |
87016868 |
Green Roll – 9′ x 25′ |
74209-G |
00464762 |
Green Roll – 12′ x 25′ |
74212-G |
00464763 |
Joining Strip – Green |
74403-G |
00464764 |
SS Hook Stake |
74000 |
00405538 |
Adhesive/Caulk |
8ADHESIVE |
11007787 |
Green-3′ x 3′ Marker Post |
74014-g |
87031777 |
|

ORANGE LADDER WEDGE
VPN: 55429-POr-M
MID: 11181671
Secures ladder footing in loose soil, gravel and uneven ground. Metal cleats provide positive traction on all surfaces.
|

FIBER CABLE TAGS
VPN: 54010
MID: 000137133
Round fiber cable tags are used in identifying cable in manholes, air pipes, etc.
|
BACKBOARDS
Quality, ready-to-install, equipment mounting boards. 3/4” interior plywood, fire retardant, and Class A rated. Contact customer service for specifications.

Description |
VPN |
MID |
04 (47-15/16” x 48” x 3/4”) |
50104-FR |
11043238 |
79A (4-15/16″ x 12-1/2″ x 3/4″) |
501079A-FR |
11053153 |
81 (12-1/2″ x 25-1/2″ x 3/4″) |
501081-FR |
11053154 |
82A (6-3/4″ x 38-1/2″ x 3/4″) |
501082A-FR |
11053155 |
82B (9-3/8″ x 54-7/8″ x 3/4″) |
501082B-FR |
11053156 |
82C (11-7/8″ x 55-5/8″ x 3/4″) |
501082C-FR |
11053157 |
82D (6-3/4″ x 21-3/8″ x 3/4″) |
501082D-FR |
11053158 |
82E (14″ x 24-3/4″ x 3/4″) |
501082E-FR |
11053159 |
82F (14″ x 45″ x 3/4″) |
501082F-FR |
11053160 |
82G (9-3/8″ x 63″ x 3/4″) |
501082G-FR |
11053161 |
82H (17″ x 26″ x 3/4″) |
501082H-FR |
11053162 |
82J (24″ x 36″ x 3/4″) |
501082J-FRG |
11054889 |
82K (24″ x 48″ x 3/4″) |
501082K-FR |
11053163 |
|

SPLICER SEAT
Grey Seat
VPN: 55430
MID: 341698
Orange Seat
VPN: 55430-710-OR
MID: 11061353
Made of molded, heavy-duty polyethylene. Keeps tools close at hand and offers three different working heights. Complete with adapter for the 710 Splicing Machine. Available in safety orange or grey.
|

ERGONOMIC SPLICER SEAT
Grey ErgoSeat
VPN: 55430-SS-POC
MID: 909685
Orange ErgoSeat
VPN: 55430-SS-POC-OR
MID: 11061352
Provides positive support to the lower back lumbar region. The padded cushion and spring design removes pressure from the lower spine. Swivels 360 degrees, and comes complete with a tool pouch. Base is available in safety orange or grey.
|

RETRO-FIT KIT
VPN: 55430-RETRO-POC
MID: 909686
Converts the “P” Splicer Seat to the Ergonomic Splicer Seat. Includes Pouch. (not shown)
|

POUCH FOR THE ERGONOMIC SPLICER SEAT
VPN: 55430-POC-A
MID: 909687
Made of ballistic nylon and attached with a simple tum-lock. Great for keeping tools, connectors and other frequently used supplies close at hand.
|

UNIVERSAL SPLICING HEAD ADAPTER
VPN: 55460
MID: 756298
Used to temporarily attach a splicing machine to the “P” Splicer Seat. Works for 710 and 3M modules.
|

SPLICER SEAT CUSHION
VPN: 55430-CU-BLK
MID: 11061351
A thickly padded cushion in a weather-resistant cover with three large tool pockets, one on each side.
|

RUNG RUNNER LADDER CADDY
VPN: 59501
MID: 11289589
U-TECK introduces the Rung Runner™, the easiest way to carry and transport heavy extension ladders from vehicle to job site. Using a universal tether, you can now carry any type of ladder, including large extension ladders with solid rails.
|

CABLE AND WIRE STORAGE BOX
VPN: 59100
MID: 11183528
A practical solution to the problem of storing and transporting drop wire, station wire, and aerial drop wire shipping boxes.
U-TECK has developed a Cable and Wire Storage Box that fits neatly in the back of service trucks and vans, keeping these boxes of wire and cable dry, safe and secure.
|
REEL-DEAL™ CABLE CADDY
VPN: 59000
MID: 11107865
Storing, transporting and using your cable reels on site is no longer a multi-step process. With the new U-TECK Reel-Deal™ Cable Caddy, you can do all of this with one simple tool.
|
MOUNTING BOARDS
18″ x 18″ – VPN: 50102
MID: 099402547
18″ x 32″ – VPN: 50103
MID: 099402539
Hard wooden backboard for mounting tools and electronic equipment.
|
BURIED CLOSURES
 |
STOP AIR LEAKS Designed to protect your pressurized closure from the weight of backfill, as well as the added weight of vehicles that run over the splice location, causing costly ghost leaks. Reduces air pressure problems around end plates and protects buried closures in rocky soil. |
Length |
VPN |
MID |
|
Coffin 38” |
55431-AB |
700221381 |
Coffin 51” |
55431-CD |
87208636 |
Coffin 59” |
55431-EF |
700221383 |
Coffin 68” |
55431-GH |
700221384 |
Coffin 76” |
55431-IJ |
700221385 |
Coffin 85″ |
55431-KL |
700221386 |
|
HI-VISIBILITY CLASS 3 SAFETY T-SHIRT

|

MAGIC WRAP®
1″ x 16′ – VPN: UT-80001
MID: 461127
2″ x 16′ – VPN: UT-80031
MID: 904263
2″ x 33′ Fire Retardant
VPN: UT-82130
MID: 11016888
Magic Wrap® is an Emergency Repair Kit on a Roll. A poly-butyl rubber compound, Magic Wrap® is activated when stretched. This activation causes Magic Wrap® to adhere to itself. Thus, any object which can be spiral wrapped can be repaired or sealed.
|
PIPE STRAPS
3.5 S – VPN: 55443
MID: 400305298
4S – VPN: 55444
MID: 401071006
Galvanized steel strap used for supporting cable and pipe.
|

HANGER BRACKETS
VPN MID
UT-T556-2 11102759
UT-T556-4 11289904
UT-T556-3 11289903
The Aluminum hanger brackets for mounting a wide variety of copper, coax or fiber optics cable terminals and splice cases on building walls or on poles.
|

FIBER OPTIC SPLICING WORKSTATION
VPN: 55701 | MID:1323690
The NEW Workstation offers twice the work area compared to the standard use tables, yet is lightweight and easy to store! The black table top even has a molded recess area to keep items from scooting off the table. Also molded into the outside frame of the table are several recess areas that can be used to securely hold alcohol, gauze and fiber sleeves.

The Fiber Splice Case Stand is a portable support stand designed to hold fiber closures when performing splicing duties. It works great in conjunction with our Fiber Optic Splicing Workstation! U-TECK’s newly improved Fiber Splice Case Stand now allows a splicing technician to securely hold the splice case in both the horizontal or vertical position while performing splicing functions or maintenance, a helpful feature when space is limited! It is strong, lightweight and able to fit your real-world splicing environments. Simple to use, it sets up quickly with your fiber case held securely to the stand platform with self gripping, velcro straps.
VPN: 55712 | MID:11344813
|
FIBER OPTIC SPLICING WORKSTATION ACCESSORIES

|