1-800-542-7011 Fax: 1-910-483-0784
info@uteck.com


 

BULK REEL – CABLE PULLING MESH

 

 

FEATURES:

  • Extremely Strong (Rated to 700lbs)
  • Adds minimal overall diameter to cable.
  • 2 sizes for a wide range of cable diameter
  • Cuts cleanly with little fraying.
  • Abrasion resistant.
  • Minimal Fraying

U-TECK’s NEW Cable Pulling Mesh Bulk Reel provides an easy convenient means of pulling various sizes of Fiber Optic Cable. Our convenient bulk reel allows you to cut and fashion grips when needed.

We recommend tying a simple bowline knot leaving a 3” minimum tail.

*See spool for instructions

*Always refer to your cable manufacturers recommended maximum pulling weights.

*Always test knot for strength before using!

Pulling Sleeve Grips are also available in a package of 3!

Call to order today! +1 (800) 542-7011

ORDERING INFORMATION
PRODUCT# DESCRIPTION
UT-MESH.50 Cable Pulling Mesh, Bulk Reel, Black, 1/2″ x 100Ft., used to pull cable sized 3/8″ to 3/4″ diameters.
UT-MESH.75 Cable Pulling Mesh, Bulk Reel, Black, 3/4″ x 75Ft., used to pull cable sizes 3/4″ to 1-1/4″ diameter

CABLE PULLING MESH GRIPS

 

 

FEATURES:

  • Extremely strong. (Rated up to 700 lbs.)
  • Convenient pulling loop.
  • Kevlar thread for stronger hold
  • Safer than other metallic grips.
  • 60” total length.
  • Adds minimal overall diameter to cable while pulling.
  • 2 color coded sizes for a wide range of cable diameter.
  • Abrasion resistant.
  • Minimal Fraying
  • Grips Can be used repeatedly after inspection

U-TECK’s Cable Pulling Grips provide an easy convenient means of pulling various sizes of Fiber Optic Cable.

Made with Dual Polymer and Kevlar Construction. Radial Compression holds cables tightly during pull.

*Always refer to your cable manufacturers recommended maximum pulling weights.

*Always test Pulling Loop & Grip Body for strength before re-using by sliding protective cover down to inspect the pulling loop and sliding back into place.

For information on tying a simple bowline knot from the Lineman’s Channel, click HERE!

Call to order today! +1 (800) 542-7011

ORDERING INFORMATION
PRODUCT# DESCRIPTION
GRIP-SM.50 Cable Pulling Grips – Small “Blue”, Black 1/2″ non-metallic mesh, used to pull cable sizes 3/8″ to 3/4″ diameter.
GRIP-L.75 Cable Pulling Grips – Large “Yellow”, Black 3/4″ non-metallic mesh, used to pull cables sizes 3/4″ to 1-1/4″ diameter.

Cable Pulling & Installation products to make your life easier

Today we are going to take a look at the Cable Pulling & Installation tools developed by U-TECK to simplify everyday jobs. All of the products featured in this article are used when dealing with cable in trenches. These products have been developed over time to solve specific issues encountered in the field.

*Please ensure you are following your company’s proper procedures when digging and laying cable*

The Fiber Drop Caddy

One of the biggest pains when starting a job is trying to lay out the coil for your fiber drops. Longer drop lines have a tendency of ‘springing back’, causing delays in the job flow having to deal with this. U-TECK’s Fiber Drop Caddy is designed to hold and manage fiber drop hand coils. This caddy is adjustable to accommodate various inside diameters of coils. This caddy can also be used to pay out fiber coils, wire, or pull tape, that are already on a core with a 1.25” inside diameter and a 5.25″ wide width, by using the spindle only.


Learn more HERE!

 

Cable Pulling Mesh

Also referred to as cable socks or stockings, Cable Pulling Mesh is used to pull cables through ducts. U-TECK’s NEW Cable Pulling Mesh provides an easy convenient means of pulling various sizes of Fiber Optic Cable. Made with Dual Polymer and Kevlar Construction, Radial Compression holds cables tightly during pull. We recommend using a Bowline knot when using the Cable Pulling Mesh. This product comes pre-cut OR in a bulk reel for added convenience!


Learn more HERE!

 

RayDius Fiber Quadrant Block

U-TECK’s New RayDius™ Fiber Quadrant Block is designed to protect fiber optic cable during installation. This product can be used as in Infeed Guide or as an Outfeed Guide for Fiber Cable to prevent breakage, which can occur on some standard quadrant blocks. Pulling Diameter  of 40” MBD (101cm), 600lbs (2700N) Max Cable Tension Load. *Always refer to recommended guidelines from cable manufacturers.

Using a new, gently curving solid design we were able to provide a smooth contour, while maintaining the required bend radius of the Fiber Optic Cable, and eliminating breakage caused from contact pressure.

This product will fit on all standard Jamb Skids, Hanger Arms, Hanger Blocks, Support Bars and Pole Brackets. The RayDius™ block has 6 unique CableKeeper slots for using Deltec™ strapping or tie wraps when you want to ensure that the cable continues to travel over the block without bouncing off. Using proper tools, such as the RayDius™ will also greatly reduce man hours spent trying to resolve internal cable breakage issues. The RayDius™ is also safer to utilize and lightweight for easier manuvering
in small spaces with ergonomic grips molded into the design!

Learn more HERE!

 

Micro Trench Tamper Tool

One challenge faced when placing fiber into these trenches is making sure the fiber is laying at the bottom of the entire trench in order to avoid potential future damage by road re-surfacing or other maintenance activities on the surface above. We’ve created a quick and easy tool that will ensure that your fiber is tucked neatly at the bottom of the trench and out of harms way.

The 3/4” thick, 14” long tamper fits easily into the slot-cut, and, with it’s curved end design, fits snug to the fiber cable without pinching or cutting. The tamper end is made from 100% recycled plastics fitted over welded forged steel. The straight 48“ hardwood handle makes it easy to use and quick to tuck away in the back of your truck.


Learn more HERE!

 

Clip Insertion Tool

Micro-trenching involves cutting a narrow trench into concrete sidewalks, asphalt roadways, across parking lots, etc. Microduct is then installed into these trenches and usually placed relatively shallow as compared to traditional cable trenches. Many times the ducts float inside the trench for a myriad of reasons, mostly from the memory of the plastics, or the direction the trench is taking.

U-TECK has developed an approved method of holding the duct firmly to the bottom of the trench by placing our new trench clips into the narrow gap of the trench and firmly against the duct. These spring clips expand and press against the sidewalls of the trench and hold the duct in place so that backfilling procedures can then take place. These clips are installed using our trench clip insertion tool. A trench clip is attached to the tip of the trench clip insertion tool and then pressed into the gap of the trench and firmly against to the top of the duct. Trench clips are specially designed to release from the insertion tool as they are forced into the gap.

Learn more HERE!

 

The Street Saver

U-TECK’s New “Street Saver” Micro-Trench Protectors gives Fiber Optic Contractors added protection on their Saw Cuts, keeping the trench open and preventing breakage, prior to back filling. Using the Micro-Trench Protector results in a much cleaner looking finished product.

Two lengths are available to assist in complete trench coverage, and linking The “Street Savers” together is simple using our interlocking design, which also allows for flexibility when micro-trenches are cut along curves

For higher speed traffic or overnight construction, there are 6 holes which can be used for temporally screwing or bolting the Street Savers into place.

The “Street Saver” is Constructed from High Density Poly Ethylene (HDPE), will not break or crack under heavy traffic and are UV Stable. The Hi-Vis HDPE ensures increased motorist awareness to the construction zone. The Sloped Edges ensure ease for Ingress and Egress.

The “Street Savers” were designed to stay in place by utilizing the ¾” fins located underneath the product. These fins sit into the Micro Trench, ensuring the Micro-Trench Protectors will stay firmly in place.

 

Learn more HERE!

 

Temporary Fiber Drop Markers

When new communication services are installed at a location, often a temporary cable is placed on the ground and left until such time as a crew can come and permanently bury the cable in the ground. This leaves the cable vulnerable from damage caused by vehicle traffic, mowers and people tripping on the cable, not aware of its presence.

U-TECK has developed a temporary solution to this problem – The Temporary Fiber Drop Markers!

Our markers are made from a Highly Visible Fluorescent Orange Acrylic material that enhances the visibility of the cable and helps reduce damage that might occur. Each marker is 2.5″ in diameter.

Simply insert the staple pin onto the marker disc with the message side up, straddle  the cable with the marker, and push firmly into the ground. The arrow indicator should align with the direction of the cable. Space markers adequately for best results.

U-TECK’s Temporary Fiber Drop Markers are meant to be reused.

Learn more HERE!

Fiber Optic Splicing Workstation

Some accessories shown are to be purchased separately.

VPN: 55706

Shown with Straps

  FEATURES:

  • Portable workbench
  • Large work surface
  • Compact fold-up
  • Built in slots & holes for tools
  • Heavy duty steel legs
  • Cable management attachment included
  • Quick-attach standoffs for hanging

U-TECK is proud to offer the next generation fiber splicing workstation to support fiber splicing at the splice or optical network terminal (ONT).  The NEW! Fiber Optic Splicing Workstation has a larger work surface, but offers the ability to fit in most work sites. It can be used as a freestanding workbench or in narrow manhole environments, inside tents, central office work, and light enough for aerial work in a bucket or attached directly to the cable support strand by removing the work surface from the stand.

The heavy duty, steel legs lock firmly to the work surface and stands at a generous 31-1/2 inches tall, keeping your table at a comfortable working level.  Our unique Cable Management Bracket fits securely on either side of the workbench, allowing jacketed strands to stay put and separated until you need them.

Separate the work surface from the stand and quickly attach the two unique stand-off props with adjustable webbing into the 4 accessory slots and you can take your work table to new heights, giving you a secure and level work surface when hanging it over terminal casings inside data rooms, closets, and outdoors against a wall for wall-mounted ONT’s or NID’s.

Attach the Aerial Strand Cables into the 4 accessory slots and your table is right where you need it for work at the cable support strand while working from an aerial bucket truck.

The Workstation surface area is approximately 35-1/2” x 22-1/2”, with an inside recessed area of 22” x 18” and a weight capacity of 100 lbs. Slots and holes are molded into the table to conveniently hold tools, parts, splicing sleeves and other splicing equipment. This recessed area prevents small pieces from rolling off. The table folds up neatly for quick and easy transport and storage.

If you use the Workstation with the table top, floor stand and cable management bracket, it will weigh in at 17.63 lbs.

Hanging the Workstation using just table top, stand-offs, and the cable management bracket, the total weight is a mere 10.27 lbs!

No matter where your fiber splicing duties take you, you’ll want to have this lightweight Workstation available at all times. Durable, portable and stable, this will become a standard in your splicing environment.

Workstation with floor stand, cable management bracket, and stand-offs   VPN: 55701
Workstation with floor stand and cable management bracket   VPN: 55706

Watch the Video!

ACCESSORIES:

Stand-Offs
VPN: 55711
2.4 lbs

Tablet Holder
VPN: 55720
1.45 lbs

Splicer Tray Holder
VPN: 55725
.51 lbs

Splicer Seat
VPN: 55430-OR
10 lbs

Splicer Seat Tether
VPN: 55745
5 oz

LED Dual Power Light with Magnifying Glass
VPN: 55615
1.45 lbs

Tool Saddle with Pocket
VPN: 55430-BLK
14 oz

Black Poly-Mesh 3 Pocket Pouch
VPN: 55710
.15 lbs

Wheel Kit
VPN: 55740
10oz

Fiber Splice Case Stand
VPN: 55712
10 lbs

Aerial Strand Cables
VPN: 55715
1 lbs

Fiber Splice Case Stand

VPN: 55712

FEATURES:

  • Secures splice cases for fiber work
  • Portable and lightweight construction
  • Locking safety hinge pin platform and knob-style tension locking legs
  • Works with most splice case sizes
  • Load capacity 132 lbs.
  • Maximum tripod height is 63” with a minimum of 40”

The Fiber Splice Case Stand is a portable support stand designed to hold fiber closures when performing splicing duties with the Fiber Optic Splicing Workstation. It is strong, lightweight and able to fit your real-world splicing environments. Simple to use, it sets up quickly with your fiber case held securely to the stand platform with self gripping, velcro straps.

The Fiber Splice Case Stand is built for years of repeated use. The support beam is constructed from lightweight aluminum that secures the polymer platform and a heavy-duty hinge with locking safety pin for maximum strength/security, with a sturdy cable guide. The tripod is made of reinforced metal tubing and the legs feature knob-style tension locking.

Create your ideal work environment with the Fiber Optic Splicing Workstation and the Fiber Slice Case Stand!

 

 

MORE FIBER OPTIC SPLICING WORKSTATION ACCESSORIES:

clear clear
LED Light with Magnifying Glass
VPN: 55615
Wt: 1.45 lbs
Aerial Strand Cables
VPN: 55715
Wt: 1 lbs
Stand-Offs
VPN: 55711
Wt: 2.4 lbs
tablet-holder splice-tray-holder
Black Poly-Mesh 3-Pocket Pouch
VPN: 55710
Wt: .15 lbs
Tablet Holder
VPN: 55720
Wt: 1.71 lbs
Splice Tray Holder
VPN: 55725
Wt: .51 lbs

Rainwear

BLACK SERIES RAINCOAT

Lime VPN: ML-RWJ106
Orange VPN: ML-RWJ107

PERFORMANCE FEATURES

  • Water proof material with durable
    seam sealed construction
  • Black bottom and accents for a mix
    of functionality and style
  • Reflective trim improves reflectivity
    all the way around the garment
  • 2” wide Reflexite® reflective material
    performs exceptionally well under wet conditions
  • Waterproof front zipper
  • Adjustable wrist cuffs
  • Ventilated back and arm pits
  • Reinforced D-ring access on back

POCKETS

  • Vertical left chest pocket with
    waterproof zipper
  • Lower front slash pockets with
    waterproof zipper
  • Left arm cell phone pocket with
    storm flap and zipper closure

SIZES & COMPLIANCE

SIZES: S-M. L-XL, 2X-3-X, 4X-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Compliant

 

STORM STOPPER PRO RAINWEAR

Lime Jacket VPN: ML-RWJ100
Orange Jacket VPN: ML-RWJ101

Lime Pants VPN: ML-RWP100
Orange Pants VPN: ML-RWP101

PERFORMANCE FEATURES

  • Reflexite® prismatic reflective tape performs exceptionally well under wet conditions, and provides additional durability over silver glass bead reflective materials
  • Waterproof breathable material with seam sealed construction keeps the wearer warm and dry
  • Vented cape back for additional breath-ability
  • Hidden collar hood
  • D-Ring access on back
  • Adjustable wrist and ankle cuffs
  • Black lower body and sleeves help keep the wearer’s appearance neat and clean

POCKETS

  • Two outside pockets with storm flaps and snaps
  • Left chest radio pocket

SIZES & COMPLIANCE

SIZES: S-M, L-XL, 2X-3X, 4X-5X Sizing Chart

ANSI/ISEA 107 2010 Class 3 Compliant – Jacket
ANSI/ISEA 107 2010 Class E Compliant – Pants

 

BRILLIANT SERIES LONG RAIN COAT

Lime VPN: ML-RWJ108
Orange VPN: ML-RWJ109

PERFORMANCE FEATURES

  • Waterproof material with durable seam sealed construction
  • 2″ wide CNSS reflective material
  • Zipper/storm flap closure for weather protection
  • Non-sparking snaps and zipper
  • Reflective piping on shoulders, hood and sleeve seams
  • Adjustable wrist cuffs
  • Black lower body and sleeves help keep the wearer’s appearance neat and clean

POCKETS

  • Lower front patch pockets with flaps

SIZES & COMPLIANCE

SIZES: S-M, L-XL, 2X-3X, 4X-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Comp

STORM COVER RAINWEAR

Lime Jacket VPN: ML-RWJ102
Orange Jacket VPN: ML-RWJ103

Lime Pants VPN: ML-RWP102
Orange Pants VPN: ML-RWP103

PERFORMANCE FEATURES

  • Waterproof material with durable seam sealed construction
  • 2″ wide CNSS reflective material
  • Zipper/storm flap closure for weather protection
  • Non-sparking snaps and zipper
  • Adjustable wrist cuffs

POCKETS

  • Lower front patch pockets with snap closure
  • Left chest radio pocket

PANTS FEATURES

  • Adjustable leg cuff straps

SIZES & COMPLIANCE

SIZES: S-M, L-XL, 2X-3X, 4X-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Compliant – Jacket
ANSI/ISEA 107 2010 Class E Compliant – Pants

 

STORM STOPPER RAINWEAR

Lime Jacket VPN: ML-9665J
Lime Bibs VPN: ML-9665P

PERFORMANCE FEATURES

  • Comfortable, high quality waterproof material
  • 2″ wide CNSS reflective material
  • Durable seam sealed construction
  • Zipper/storm flap closure for weather protection
  • Non-sparking snaps and zipper
  • Fully vented cape back for breathable ventilation
  • Fall protection D-Ring access
  • Adjustable hook & loop wrist straps

POCKETS

  • Patch pockets with snap closure

BIB FEATURES

  • High quality elastic suspenders with quick release buckle
  • Adjustable leg cuff straps
  • Front fly with snap closure

SIZES & COMPLIANCE

SIZES: S-M, L-XL, 2X-3X, 4X-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Compliant – Jacket
ANSI/ISEA 107 2010 Class E Compliant – Bib

ECONOMY RAINWEAR SET

Lime Full Set VPN: ML-RW110
Orange Full Set VPN: ML- RW111

PERFORMANCE FEATURES

  • This is sold as a full rainsuit (No separates)
  • Waterproof material with durable seam sealed construction
  • 2″ wide CNSS reflective material
  • Zipper/storm flap closure for weather protection
  • Non-sparking snaps and zipper
  • Adjustable wrist cuffs

POCKETS

  • Lower front patch pockets

PANTS FEATURES

  • Adjustable leg cuff straps

SIZES & COMPLIANCE

SIZES: S-M, L-XL, 2X-3X, 4X-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Compliant – Jacket
ANSI/ISEA 107 2010 Class E Compliant – Pants

 

BLACK SERIES RAINWEAR

Lime Jacket VPN: ML-RWJ104
Orange Jacket VPN: ML-RWJ105

Lime Pants VPN: ML-RWP104
Orange Pants VPN: ML-RWP105

PERFORMANCE FEATURES

  • Reflexite® prismatic reflective tape performs exceptionally well under wet conditions, and provides additional durability over silver glass bead reflective materials
  • Charcoal material and reflective piping along the shoulders and hood help to identify the human form for greater visibility
  • Waterproof breathable material with durable seam sealed construction
  • Hidden collar hood
  • Zipper/storm flap closure for weather protection
  • Adjustable cuffs
  • Breathable mesh liner

POCKETS

  • Vertical left chest pocket with waterproof zipper
  • Lower outside patch pockets with snap closure

PANTS FEATURES

  • Right leg cargo pocket
  • Adjustable leg cuff straps
SIZES & COMPLIANCE

SIZES: S-M, L-XL, 2X-3X, 4X-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Compliant – Jacket
ANSI/ISEA 107 2010 Class E Compliant – Pants

 

accessories

 

HARD HAT SUN SHIELD

Lime VPN: ML-2810, Orange VPN: ML-2813

PERFORMANCE FEATURES

  • Keeps your neck well shaded
  • Elastic band to fit over most hard hats
  • Ultra-Cool™ 100% polyester mesh with contrasting trim
  • 5/8″ silver reflective material with contrasting colors

SIZES & COMPLIANCE

SIZES: One size fits all
Not ANSI/ISEA Compliant

HARD HAT NAPE PROTECTOR

Lime VPN: ML-2808, Orange VPN: ML-2809

PERFORMANCE FEATURES

  • Protects your neck from the sun while wearing your hard hat
  • 100% polyester
  • Self-adhesive hook & loop tabs allow you to attach to the inside or outside of any hard hat
  • 2″ wide silver reflective material

SIZES & COMPLIANCE

SIZES: One size fits all
Not ANSI/ISEA Compliant

2-TONE HARD HAT COVER

Lime/Orange  VPN: ML-2871

PERFORMANCE FEATURES

  • 100% polyester mesh
  • Elastic band to fit over many different hard hats
  • Built in hooks secure the cover to your hard hat
  • 1″ wide silver reflective material

SIZES & COMPLIANCE

SIZES: One size fits most hard hats
ANSI/ISEA 107 2010 Headwear Compliant

KNIT BEANIE

Lime VPN: ML-2826, Orange VPN: ML-2827

PERFORMANCE FEATURES

  • Soft 100% polyester knit material
  • Two stripes of reflective thread are woven into the beanie, allowing for greater flexibility over sewn on reflective tape.

SIZES & COMPLIANCE

SIZES: One size fits most
Not ANSI/ISEA Compliant

FULL BRIM SAFARI HAT

Lime (S – M) VPN: ML-2822
Lime (L – XL) VPN: ML-2824
Orange (S – M) VPN: ML-2823
Orange (L – XL) VPN: ML-2825

PERFORMANCE FEATURES

  • 100% polyester mesh
  • Mesh around the crown of the head keeps you cool and well ventilated
  • 1″ wide silver reflective material with 2″ contrasting color stripes 360 degrees around the hat
  • Dark grey under brim reduces glare
  • Silver reflective piping around brim and top of hat
  • Drawstring keeps the hat securely on your head

SIZES & COMPLIANCE

SIZES: S-M, L-XL
ANSI/ISEA 107 2010 Headwear Compliant

 

BASEBALL CAP

Lime VPN: ML-2854, Orange VPN: ML- 2855

PERFORMANCE FEATURES

  • Stylish high visibility baseball cap
  • 100% polyester material
  • 1/2″ wide silver reflective material
  • Two mesh panels on cap for breathability
  • Dark grey under brim reduces glare

SIZES & COMPLIANCE

SIZES: One size fits most
ANSI/ISEA 107 2010 Headwear Compliant

 

BASEBALL CAP SUNSHIELD

Lime VPN: ML-2811, Orange VPN: ML-2812

PERFORMANCE FEATURES

  • Snaps into place on left and right side of our baseball cap (2854/2855)
  • Reflective edging maintains 360 degree visibility around the cap
  • Secure hook & loop connects to back strap

SIZES & COMPLIANCE

SIZES: One size fits most
Not ANSI/ISEA Compliant

MULTI-WEAR CLIMATE SHIELD

Lime VPN: ML-2816

PERFORMANCE FEATURES

  • Multiple configurations to fit any style or weather condition
  • Lightweight 100% polyester jersey knit material
  • Two 1″ strips of silver reflective material ensures nighttime or low light visibility in any configuration

SIZES & COMPLIANCE

SIZES: One size fits most
Not ANSI/ISEA Compliant

FULL BRIM SUN SHIELD

Lime VPN: ML-2873, Orange VPN: ML-2874

PERFORMANCE FEATURES

  • 100% polyester shade with breathable mesh nape protector
  • Designed to fit over full brim hard hats
  • Easy to fold and put away
  • Brilliant trim reflective material edging improves low light visibility
  • 1/2″ reflective stripe with contrasting color

 

SINGLE STRIPE SEAT BELT COVERS

Lime VPN: ML-3902, Orange VPN: ML-3903

PERFORMANCE FEATURES

  • High visibility seat belt covers make it easy to ensure your workers are practicing proper safety and are buckled up
  • 1″ wide full length reflective stripe
  • Hook & loop closure
  • Sold in a pair

DUAL STRIPE SEAT BELT CUSHION

Lime VPN: ML-3901, Orange VPN: ML-3900

PERFORMANCE FEATURES

  • High visibility seat belt covers make it easy to ensure your workers are practicing proper safety and are buckled up
  • 2″ wide silver reflective material
  • Hook & loop closure
  • Sold in a pair

ARM/ANKLE BANDS

Lime VPN: ML-3881, Orange VPN: ML-3882

PERFORMANCE FEATURES

  • 2″ wide elastic arm/ankle band for added visibility
  • 5/8″ silver reflective material
  • Hook & loop adjust-ability

REFLECTIVE WAIST BANDS

Lime VPN: ML-3896, Orange VPN: ML-3897
Silver VPN: 3895

PERFORMANCE FEATURES

  • 2″ wide reflective material
    (Prismatic PVC for 3896 & 3897)
  • Adjustable up to 54″
  • Plastic clasp closure

 

STOP SIGNS

NON-REFLECTIVE

  • A. 5950 STOP/SLOW | 18″ Screened – 9″ handle
  • 5951 STOP/STOP | 18″ Screened – 9″ handle
  • B. 5965 STOP/STOP | 18″ Screened coroplast – 9″ handle

REFLECTIVE: ENGINEER GRADE

  • C. 5960 STOP/SLOW | 18″ Sign – 12″ handle

REFLECTIVE: HIGH INTENSITY GRADE

  • D. 5961 STOP/SLOW | 18″ Sign – 12″ handle
  • E. 5963 STOP/SLOW | 18″ Sign – 60″ one piece handle

WARNING FLAGS

STANDARD WARNING FLAGS

  • A. 1600 VINYL
    18″ x 18″ red/orange reinforced vinyl material – 3/4″ X 24″ hardwood dowel
  • B. 1703 MESH
    18″ x 18″ red/orange vinyl coated mesh – 3/4″ X 24″ hardwood dowel

VINYL FLAG W/ DIAGONAL STAY

  • C. 1600S VINYL
    18″ x 18″ red/orange vinyl coated material – 3/4″ X 24″ hardwood dowel – Diagonal stay keeps flag open

HEAVY DUTY VINYL COATED MESH
W/ ORANGE PRISMATIC TAPE

  • D. 5988 w/ PVC Trim
    18″ x 18″ red/orange 10oz. vinyl coated mesh, 3/4″ X 24″ hardwood dowel, and 2″ wide orange prismatic reflective material

 

OVERHANG SIGNS

MESH (A)

  • 18″ X 18″ fluorescent red/orange 10oz. heavy duty vinyl coated mesh – 12 gauge wire hanger

COTTON (B)

  • 18″ X 18″ red lightweight cotton fabric – 12 gauge wire hanger

 

EZ Cooling Towel

Blue – VPN ML-396-602B

PERFORMANCE FEATURES

 Measures 13″ x 13″

  • Advanced PVA material absorbs water and sweat efficiently and remains active for hours
  • Natural evaporation provides a cooling sensation delivering comfort in warm environments
  • Easy to use
  • Designed to be used over and over again
  • If unopened the PVA cooling towel has an unlimited shelf life

SIZES & COMPLIANCE

SIZES: 13″ X 13″

 

CLASS E PANTS

MESH PANTS

PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh material
  • Drawstring waist with elastic back
  • Elastic bottom cuffs
  • Pocket access slits
  • 2″ wide silver reflective material or 2″ wide Reflexite® reflective material

ADDITIONAL FEATURES

  • Model # 3116 & 3117 have 8″ zipper leg for boot access

SIZES & COMPLIANCE

S-M: Waist – Up to 48″ | Inseam – 29″
L-XL: Waist – Up to 54″ | Inseam – 32″
2X-4X: Waist – Up to 66″ | Inseam – 34″
ANSI/ISEA 107 2010 Class E Compliant

Size Chart

 

BRILLIANT SERIES MESH PANTS

Lime VPN: ML-3118, Orange VPN: ML-3119

PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh
  • Brilliant Trim reflective edging
    running the length of the leg both inside and out
  • Hook & loop fly with adjustable sides
    and elastic back
  • 2” wide silver reflective material
    with 3” breathable contrasting color
  • Elastic bottom cuff with zipper
    for boot access
  • Black bottom to keep a clean appearance

POCKETS

  • Heavy duty solid left and right cargo pockets with reflective piping
  • Left and right side pocket access slits

SIZES & COMPLIANCE

S-M: Waist – Up to 48″ | Inseam – 29″
L-XL: Waist – Up to 54″ | Inseam – 32″
2X-4X: Waist – Up to 66″ | Inseam – 34″
ANSI/ISEA 107 2010 Class E Compliant

Size Chart

 

MESH GAITORS

Lime VPN: ML-3930, Orange VPN: ML-3931

PERFORMANCE FEATURES

  • Two 2″ wide silver reflective stripes encircle the gaiter
  • Ultra-Cool™ 100% polyester mesh
  • Hook & loop closure

 

BLACK SERIES MESH GAITORS

Lime VPN: ML-3932, Orange VPN: ML-3933

PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh
  • 2″ wide reflective material with
    contrasting mesh
  • Zipper closure with hook & loop
    adjustable bottom for easy boot access
  • Black bottom to help keep clean appearance

 

BLACK SERIES WATERPROOF GAITORS

Lime VPN: ML-3934, Orange VPN: ML-3935

PERFORMANCE FEATURES

  • Waterproof material with durable seam
    sealed construction to keep you dry and comfortable
  • 2″ wide reflective material with
    contrasting mesh
  • Zipper closure with storm flap and hook
    & loop adjustable bottom for easy
    boot access
  • Black bottom to help keep clean
    appearance

 

SPECIALTY VESTS

BRILLIANT SERIES HEAVY DUTY
MOSSY OAK VEST

Lime VPN: ML-1523, Orange VPN: ML-1524

PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh with Mossy Oak® Break-Up Infinity bottom & trim to keep vest appearance clean and sporty
  • Zipper front closure with durable webbing reinforcement
  • 2″ wide silver breathable reflective material greatly reduces hot spots
  • Reflective piping down sides increases low light visibility
  • Left chest mic tab

POCKETS

  • Two lower outside expandable cargo pockets with flaps
  • Right chest 2-tier, 4-division pencil pocket
  • Left chest gusseted radio/utility pocket with reflective piping
  • Inside lower left heavy duty tablet (iPad) pocket with load-bearing strap

SIZES & COMPLIANCE

SIZES: M-5X Sizing Chart
ANSI/ISEA 107 Class 2 Compliant

 

BRILLIANT SERIES LADIES FITTED VEST

Lime VPN: ML-1521

PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh back and sides with lightweight solid front
  • Zipper front closure
  • 2″ wide CNSS reflective material
  • Reflective trim around arms & piping down sides for added low light visibility
  • Waist cinches to ensure a perfect fit

POCKETS

  • Two hidden lower outside slash pockets with zipper closures
  • Inside ergonomically positioned lower left radio pocket with flap

SIZES & COMPLIANCE

LADIES SIZES: S, M, L, XL Sizing Chart
ANSI/ISEA 107 Class 2 Compliant

BLACK SERIES SURVEYORS VEST

Lime VPN: ML-S5002, Orange VPN: ML-S5003

PERFORMANCE FEATURES

  • Solid polyester front with mesh back
  • Heavy duty black bottom and trim to help keep a clean appearance
  • Zipper front closure reinforced with durable webbing
  • 2″ wide CNSS reflective material laminated to 3″ contrasting color
  • Left and right mic tabs
  • 2 lapel grommets
  • Padded neck for comfort

POCKETS

  • Left chest 2-tier pocket with dual function flap that can be held open by hook & loop
  • Large right gusseted pocket with flap
  • Outside lower front pockets with flaps, left and right stake pockets, left and right elastic spray paint can pockets
  • Lower inside right full length zipper pocket with load bearing strap
  • Lower inside left tablet (iPad) pocket with load bearing strap
  • Hidden back pouch with left and right zipper access

SIZES & COMPLIANCE

SIZES: M-5X Sizing Chart

Size medium does not have black trim around arms – Will match garment color

ANSI/ISEA 107 Class 2 Compliant

CLASS 2: PROFESSIONAL
SURVEYORS VEST

Orange VPN: ML- s5000, Lime VPN: ML-s5001

PERFORMANCE FEATURES

  • Solid polyester front with mesh back
  • Zipper front closure reinforced with durable webbing
  • 2″ wide CNSS reflective material laminated to 3″ contrasting color
  • Left & right mic tabs
  • 2 lapel grommets

POCKETS

  • Left chest 2-tier pocket with dual function flap that can be held open by hook & loop
  • Large right gusseted pocket with flap
  • Outside lower front pockets with flaps, left and right stake pockets, left and right elastic spray paint can pockets
  • Lower inside left and right full length zipper pockets with load-bearing straps
  • Hidden back pouch with left and right zipper access

SIZES & COMPLIANCE

SIZES: M-5X Sizing Chart
ANSI/ISEA 107 2010 Class 2 Compliant

 

CLASS 3: PROFESSIONAL
SURVEYORS VEST

Lime VPN: ML-S5010, Orange VPN: ML-S5011

PERFORMANCE FEATURES

  • Solid polyester front with mesh back and sleeves
  • 2” wide CNSS reflective material laminated to 3″ contrasting color
  • Zipper front closure reinforced with durable webbing
  • Left and right mic tabs
  • 2 lapel grommets

POCKETS

  • Left chest 2-tier pocket with dual function flap that can be held open by hook & loop
  • Large right gusseted pocket
  • Outside lower front pockets with flaps, left and right stake pockets, left and right elastic spray paint can pockets
  • Lower inside left and right full length zipper pockets with load-bearing straps
  • Hidden back pouch with left and right zipper access

SIZES & COMPLIANCE

SIZES: M-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Compliant

 

FALL PROTECTION VEST

Lime VPN: ML-T341

PERFORMANCE FEATURES

  • Durable 100% polyester solid front with Ultra-Cool mesh back
  • 2” wide CNSS reflective material on 3″ contrasting material
  • Snap front closure
  • Back and side openings for harness rings
  • Left and right chest mic tabs

POCKETS

  • Left chest radio pocket with flap
  • Right chest 2-tier pencil pocket
  • Two lower front expandable-flap closure pockets
  • Two lower inside patch pockets

SIZES & COMPLIANCE

SIZES: S-M, L-XL, 2X-3X, 4X-5X Sizing Chart
ANSI/ISEA 107 2010 Class 2 Compliant

N SERIES MESH VEST

PERFORMANCE FEATURES

  • High quality polyester
  • Comfortable cotton trim
  • Three 2″ wide reflective stripes on back and two on front
  • 3″ hook & loop front closure
  • 3/4″ elastic side closures for universal sizing

POCKETS

  • No pockets

SIZES & COMPLIANCE

SIZES: ONE SIZE FITS MOST Sizing Chart
Not ANSI/ISEA Compliant

T SERIES MESH VEST

PERFORMANCE FEATURES

  • Tightly woven mesh
  • Comfortable cotton trim
  • 1″ wide reflective stripes
  • 3″ hook & loop front closure
  • 3/4″ elastic side closures for universal sizing

POCKETS

  • No pockets

SIZES & COMPLIANCE

SIZES: ONE SIZE FITS MOST Sizing Chart
Not ANSI/ISEA Compliant

P SERIES MESH VEST

PERFORMANCE FEATURES

  • Comfortable cotton trim
  • 1″ wide reflective stripes
  • 1.5″ wide reflective tape on P-V21 & PL-V22
  • 3″ hook & loop front closure
  • 3/4″ elastic side closures for universal sizing

POCKETS

  • No pockets

SIZES & COMPLIANCE

SIZES: ONE SIZE FITS MOST Sizing Chart
Not ANSI/ISEA Compliant

 

MULTI-POCKET SURVEYORS VEST

Lime VPN: ML-1092, Orange VPN: ML-1091

PERFORMANCE FEATURES

  • 100% polyester solid material
  • 1” wide reflective material with 2″ wide contrasting material
  • Zipper front closure
POCKETS
  • Two lower outside patch pockets with flaps
  • Two outside chest pencil pockets
  • Two inside patch pockets
SIZES & COMPLIANCE

SIZES: M-5X Sizing Chart
Not ANSI/ISEA Compliant

BREAKAWAY VESTS

CONTRASTING MESH BREAKAWAY VEST

Lime VPN: ML-1174, Orange VPN: ML- 1176

PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh
  • Hook & loop breakaway shoulders, sides, and front closure
  • 2” wide CNSS reflective material with 4.5” contrasting color

POCKETS

  • Inside right chest cell phone pocket
  • Inside left chest 2-tier 4-division pencil pocket
  • Inside lower left patch pocket

SIZES & COMPLIANCE

SIZES: M-5X Sizing Chart
ANSI/ISEA 107 2010 Class 2 Compliant

4 SEASON BREAKAWAY VEST

Lime VPN: ML-1166BA, Orange VPN: ML-1167BA

 PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh
  • Hook & loop front closure
  • 5-point breakaway
  • 4-season adjust-ability allows for accurate sizing in any weather, even over bulky coats
  • Two 1” wide CNSS reflective material with 4.5” contrasting color
  • Left chest mic tab

POCKETS

  • Outside left chest 2-tier pencil pocket
  • Inside right chest 2-tier pencil/cell pocket
  • Two inside lower patch pockets

SIZES & COMPLIANCE

SIZES: M-XL, 2X-4X Sizing Chart
ANSI/ISEA 107 2010 Class 2 Compliant

 

BRILLIANT SERIES CLASS 3
BREAKAWAY VEST

Lime VPN: ML-1552B, Orange VPN: ML-1553B

PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh material
  • Brilliant Trim reflective edging improves low light visibility
  • 5-point breakaway
  • 2″ wide CNSS material on 3″ contrast
  • Left and right chest mic tabs

POCKETS

  • Two outside lower solid patch pockets with scalloped flaps
  • Right chest 4-division pencil pocket
  • Left chest radio pocket
  • Two large lower inside pockets

SIZES & COMPLIANCE

SIZES: M-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Compliant

 

BRILLIANT SERIES BREAKAWAY VEST

Lime VPN: ML-1505B, Orange VPN: ML-1506B

 PERFORMANCE FEATURES

  • Ultra-Cool™ 100% polyester mesh
  • Brilliant Trim reflective edging improves low light visibility
  • 5-point breakaway with breakaway sides, shoulders and front closure
  • 2″ wide CNSS reflective material
  • Left chest mic tab

POCKETS

  • Inside right chest 2-tier 4-division pencil pocket
  • Left chest radio pocket
  • Inside left patch pocket

SIZES & COMPLIANCE

SIZES: M-5X Sizing Chart
ANSI/ISEA 107 2010 Class 3 Compliant

 

Click on the map
to find a U-TECK sales rep
near you
Fayetteville, North Carolina
1-800-542-7011, Fax: 1-910-483-0784
Email: info@uteck.com
SITE MAP
Copyright © U-TECK 2021
All Rights Reserved