QUICK CHECK KIT
VPN: CB0130-4G-KIT
The Quick Check Kit allows you to check your gas detector while in the field to confirm it is reading necessary gases. This product contains LEL, O2, CO, and H2S gases. Kit includes a Balloon T Assembly. |
CALIBRATION KITS
VPN: PRO-CAL1
VPN: PRO-CAL2
VPN: PRO-CAL3
VPN: PRO-CAL4
These Calibration Kits allows you to properly adjust your gas detectors to NIST traceable standards. This kit is available in LEL, carbon monoxide, oxygen, and hydrogen sulfide gases. |
REPLACEMENT BUMP GAS
VPN: PRO-BUMP
The Bump Gas provides a quick check to verify that the sensors are functioning properly. Proper testing ensures worker safety. This product contains 4 gases (LEL, Carbon Monoxide, Oxygen, Hydrogen Sulfide). |
REPLACEMENT BALLOON "T" ASSEMBLY
VPN: PRO-BALLOON
Replacement Balloon “T” Assembly
for the Quick Check Kit. |
NON-CONDUCTIVE PROBE
VPN: PRO-ARPROBE
The 29" 3-piece probe is used to accurately pin point underground leaks or sources of gas in communication ducts. |
PROBE TUBING
VPN: PRO-ARPROBE
Used with the Non-Conductive Probe this 30 ft. tubing extends the reach of the gas detector in manholes while keeping the crafts person at a safe distance. |
INFRARED PRINTER
VPN: PRO-PRINT
Wireless infrared communication allows go-anywhere portability to directly print out from device to record and save your events. |
PAPER ROLL
VPN: PRO-PNIPAP
Log your events on this 6 roll set of single ply white paper for the infrared printer.
|
SMART-CAL CALIBRATION STATION
VPN: PRO-SCAL
When the Protector AR is connected to proper calibration gases, the Smart-Cal automatically communicates with the instrument tested, cycles through the appropriate tests, applies gas, stores the information, and updates the instrument. |
| 
PC INTERFACE WITH SOFTWARE
VPN: PRO-IF
The PC Interface allows the data (session and/or calibration logs) to be brought into a computer. | 
SMART-CAL STANDARD
GAS KIT
VPN: PRO-SCALGAS
This kit is to be used in conjunction with the Smart-Cal Calibration Station for the Protector AR 1 and 2. It includes a large cylinder of 2.5% methane/air and 100ppm carbon monoxide |
SMART-CAL 59L
VPN: PRO-SCALGAS2
59L of hydrogen sulfide to adjust gas detectors to NIST traceable standards.
|
ACCUMANAGER 20 CHARGER
VPN: PRO-CHAR
The super fast charger enables the recharging of rechargeable nickel cadmium, nickel metal hydride, and RAM (rechargeable alkaline manganese) batteries in one unit at the same time.
|
RECHARGEABLE BATTERIES
VPN: PRO-RECB
Always have a fully charged instrument with this set of four rechargeable C batteries.
|
HARD CARRYING CASE
VPN: PRO-CASE
This strong hard carrying case will keep your Protector AR safe while in storage or on the road. |
CARRYING HOLSTER
VPN: PRO-HOL
Our durable, belt worn holster allows you to easily carry the instrument while leaving your hands free.
|
LEL SENSOR
VPN: PRO-LEL
The LEL sensor is a low powered consumption sensor that will measure many combustible gases.
|
OXYGEN SENSOR
VPN: PRO-02
This is an advanced electrochemical sensor for sensing oxygen and is automatically calibrated each time the instrument is operated.
|
CARBON MONOXIDE SENSOR
VPN: PRO-CO
This is an advanced electrochemical sensor for sensing carbon monoxide and is automatically calibrated each time the instrument is operated.
|
HYDROGEN SULFIDE
SENSOR
VPN: PRO-H2S
This is an advanced electrochemical sensor for sensing hydrogen sulfide and is automatically calibrated each time the instrument is operated.
|
|
